Telit Mobile Terminals S.p.A. SAT551 Manuel D’Utilisation
13
Indication of switching on
By connecting the white wire to the vehicle‘s ignition you will avoid any
possibility of the vehicle telephone running the vehicle‘s battery flat. In fact,
the switching on indication will only allow the car kit to be switched on and
off when the vehicle is switched on and off.
Note: If you switch off the vehicle while a call is in progress, the call
will not be interrupted.
Globalstar wire
Note: If you switch off the vehicle while a call is in progress, the call
will not be interrupted.
Globalstar wire
The Globalstar wire is a 5 m long coaxial wire for connecting the amplifier
to the cradle. These two units must only be connected to each other using
the Globalstar wire provided in the pack.
Note: Do not cut or modify the Globalstar wire.
Ensure that the Globalstar wire is positioned inside the vehicle in
such a way that it is protected from the weather.
Globalstar magnetic external antenna
The Globalstar external antenna (provided in the pack) must be installed
for satellite communication using the car kit. The antenna is fitted with a
magnet which allows it to be positioned temporarily on a metal surface
(e.g. the vehicle‘s roof). It must face the sky and there must be no
obstacles near it.
obstacles near it.
The Globalstar antenna is connected by means of the red and black
connectors via the respective jacks on the amplifier.
Note: The antenna has been designed to withstand a maximum
speed of 160 km/h (99 mph).
The antenna is fitted with a 2 m wire.