Telit Mobile Terminals S.p.A. SAT551 Manuel D’Utilisation
19
Installing the cradle
Note: Position the cradle inside the vehicle so that it does not
interfere with normal driving operations, is not exposed to streams of
hot air coming from the vehicle’s heating system, and away from the
airbag.
Before installing the cradle bracket, check that it can be connected to
the amplifier (using the 5 m long Globalstar wire), the microphone
(using the 2.8 m long wire), the loudspeaker (using the 3 m wire),
the micro telephone and the vehicle’s IO devices.
t
Note: Position the cradle inside the vehicle so that it does not
interfere with normal driving operations, is not exposed to streams of
hot air coming from the vehicle’s heating system, and away from the
airbag.
Before installing the cradle bracket, check that it can be connected to
the amplifier (using the 5 m long Globalstar wire), the microphone
(using the 2.8 m long wire), the loudspeaker (using the 3 m wire),
the micro telephone and the vehicle’s IO devices.
t
Fit the cradle bracket (the screws are
not provided in the pack) to the
vehicle, choosing a position carefully that will allow easy, convenient use.