ATEC AL181 Manuel D’Utilisation

Is the positional adjustment
made correctly?   

Is the phase adjustment made
p r o p e r l y ?

Is the screen set in the best
state? 

Push  the 'AUTO' Button, then the

screen  will beadjusted  automati-
cally in to the  optimal state applic-
able to the current mode.
If  you are  not satisfied   with the
auto adjustment,  you can  directly
adjust the H Position (Horizontal
Position),  V Position (Vertical
Position),  and Clock (Horizontal
Size) of the OSD menus. 

Push  the 'AUTO' Button, then the
screen  will beadjusted  automati-
cally in to the  optimal state applic-
able to the current mode.

If you   are not satisfied  with  the

auto adjustment, you maym a n u a l-
ly adjust the Phase (Focus) of the
OSD menus.

While you are using  this product
in   the mode of  1280X1024 and
60Hz,  the  best condition  of   the 
screen  is   available.  In the
mode  of  VGA(640x480),SVGA
(800x600) or  XGA (1024x768),

the outline of a letter may be seen

dimly or unevenly.

Take these actions

Check these points

The screen is under a bias
toward one side, or is not
centrally positioned.

A faint letter is  shown, or 
the phase  is out of  focus. 
Noise is also  generated 
horizontally.