Manualsbrain.com
  1. Manuels
  2. Marques
  3. Cisco-Linksys LLC
  4. WPC54G-2
  5. Manuel D’Utilisation

Cisco-Linksys LLC WPC54G-2 Manuel D’Utilisation

Télécharger
Page de 17
Wireless-G Notebook Adapter
Chapter 6: Driver Installation and
Configuration for Windows XP
After inserting the Adapter into your notebook, you will install the driver and
configure the Adapter.
1. Windows XP will automatically detect the Adapter. Insert the Setup CD-
ROM into the CD-ROM drive. Click the radio button next to Install the
software automatically (Recommended). Then click the Next button.
11
Figure 6-1
Overview
Driver Installation for Windows XP
Instant Wireless
®
Series
10
Chapter 5: Hardware Installation
1. Turn off your notebook PC.  
2. Locate an available CardBus  slot on your notebook PC. 
3. With the Adapter’s
label facing up, as
shown in Figure 5-1,
slide the Adapter
completely into the
CardBus slot.
4. Restart your note-
book PC. 
5. Windows will begin copying the driver files to your computer. If Windows
asks you for the original Windows CD-ROM, insert the CD-ROM, and
direct Windows to its proper location (e.g., D:\).
If your PC is using Windows 98SE, Me, or 2000, proceed to the next sec-
tion, “Chapter 7: Using the WLAN Monitor for Windows 98SE, Me, and
2000.” 
If your PC is using Windows XP, proceed to “Chapter 6: Driver
Installation and Configuration for Windows XP.”
Figure 5-1
Important for Windows 98SE, Me, and 2000 users: You must run
the Setup Wizard to install the software before installing the hardware.
Important for Windows XP users: You must install the Adapter’s
hardware before installing the software.