CyberPower RMCARD202 Manuel D’Utilisation

 

 

 PowerPanel™ Business Edition 

 

 

 

 

 

 

 

 

 

 

 

       22    

„ 

Pending Off: This outlet is going to turn off following an action such as a scheduled turn off.

 

 

z  Status: Displays the present status of the battery packs.  

„  Fully Charged: The batteries are at 100% capacity.  

„  Discharging: The UPS is supplying battery power to support the load. This is caused by a utility 

power failure or battery test. 

„  Charging: The batteries are charging.  

„  Capacity Critically Low: The batteries capacity is too low and the UPS may shut down immediately.  

„  Not Present: There are no batteries present in the UPS. 

„  Testing: The UPS is performing a battery diagnostic test. See the UPS/Diagnostics page for more 

details about the test results.  

„  Normal: The batteries are working normally. 

z  Voltage: The present voltage supplied by the batteries.  

z  Remaining Runtime: The amount of time that the UPS can supply power to its load.  

z  Remaining Charge Time: The remaining time the batteries required to be fully charged.  

z 

Capacity: The present capacity of the batteries expressed as a percentage of full charge.

 

 

z  Status: Displays the present operating status of the UPS.  

„  Normal: The operating status is normal.  

„  Fault: The UPS is in fault state due to an internal malfunction.  

„  Overheat: The temperature exceeds the normal temperature threshold.  

z  Temperature: The present internal temperature of the UPS. It is displayed in both Celsius (°C) and 

Fahrenheit (°F).