CyberPower RMCARD202 Manuel D’Utilisation

 

 

 PowerPanel™ Business Edition 

 

 

 

 

 

 

 

 

 

 

 

       48    

Action settings allows for configuration of various event actions, including the necessary shutdown time of 

the hosted computer.  

After configuring all of the action parameters, and applying the settings, the Verify button can be used to 

verify whether the user’s configurations are correct. To test whether a notification is configured properly and 

a recipient can receive the notification successfully, use the Test function on the Event Action/Notification 

Recipient page. 

Each action has its own Activate option to specify whether to use the service to send a notification. If No is 

checked, the Verify button and the corresponding Test function will be disabled. The column displayed in 

the recipient list will be marked gray to indicate that action is disabled.  

 

 Selecting Hibernation option on the Shutdown service. 

z  Necessary shutdown time: This setting will set the amount of time the Agent/Client will take to shut 

down. 

The Client initiates the shutdown before power is stopped from the PDU or UPS in order to avoid a 

sudden blackout. This setting should be configured to allow for the normal shutdown time of the 

computer.  

When a PDU performs a sequenced off/reboot action, each outlet has a specified delay time (delay-off) 

before it is turned off. This delay time must be greater than the Necessary shutdown time required by a 

Client computer. The Client will communicate with the PDU to verify whether this delay time is sufficient.  

If the delay time is insufficient a warning message will display.. The User can expand it and configure the 

outlet delay-off of the PDU or configure it in the PDU web interface manually. The warning message will 

be visible until these options are setup properly.