HONG KONG IPRO TECHNOLOGY CO. LIMITED IPROVENUS Manuel D’Utilisation
8
2.1.1 Insert and pull out the SIM card
¾ The SIM card is generally placed in a card. Before installation, take cautions to take out the SIM card.
¾ Power off your mobile phone and then remove the battery and other external power supply.
¾ Insert the SIM card into the SIM card slot.
¾ When you need to pull out your SIM card, please power off your mobile phone firstly, remove the battery, pull out
¾ Power off your mobile phone and then remove the battery and other external power supply.
¾ Insert the SIM card into the SIM card slot.
¾ When you need to pull out your SIM card, please power off your mobile phone firstly, remove the battery, pull out
your SIM card
2.2 Battery
¾ The initial battery is of 50% charge, so it can be used right after being unpacked. The new battery should be
charged at least for 14 hours. Only when the initial battery is exhausted thoroughly (the electricity quantity runs out
and the mobile phone can not power on) can the battery be fully recharged for use, so does the second time charging.
Only when recycled for three times in this way can the battery works in the best condition easily.
2.2.1 Pull out and install the battery
¾ Follow the following steps to pull out the battery: ① Open the back cover; ② Pull the battery upwards and get it
out.
¾
Follow the following steps to install the battery: ①Insert the battery into the battery slot; ②The back cover until it
fastens.
2.2.2 Charge the Battery
¾ Connect the batter charger to a power supply;
¾ USB interface at the bottom of the charger plug into the phone.
¾ Then the power quantity indicator in the upper right corner of the mobile phone screen will flicker. If the phone has
been powered off, the screen will display “charging” and this indicates that the battery is being charged. If the phone
is still in use despite of lack of power, the power indicator may take some time to appear on the screen.
¾ If the power indicator is full and stops to flicker, this means that the charge has been finished. This process often
takes 3 to 4 hours. It is normal that, during charge, the battery, mobile phone and battery charger become hot.
¾ After the charge is completed, please disconnect the AC power supply socket and the mobile phone with the battery
charger.
*Note:
--During the charge, the handset should be placed where the ventilation is good and the temperature is between +5
0
C
to +40
0
C. In addition, you should use the charger provided by the manufacturer, for the unauthenticated chargers
may cause danger and disobey the recognition and maintenance clauses of this mobile phone.
--When your mobile phone automatically powers off or displays the warning of “Low Power”, you should charge the
battery in time. In case the battery has not run out before charge, the mobile phone will shorten the charge time
automatically.