Prime Electronics & Satellitics Inc. VT2RSP Manuel D’Utilisation
8
Video Sender Manual Version 5/2
3.2 Receiver
:
Make sure the ON/OFF switch is at the OFF position before setup.
Connect power adaptor to receiver.
Plug power adaptor to wall outlet.
Connect receiver to TV set or other A/V displays.
Set the receiving channel same as transmitter at back panel of receiver.
Connect power adaptor to receiver.
Plug power adaptor to wall outlet.
Connect receiver to TV set or other A/V displays.
Set the receiving channel same as transmitter at back panel of receiver.
See “Channel and dwell time selection” to setup channel.
Turn the ON/OFF switch to ON position, the related channel indicator
should be lit.
ANTENNA
IN
RF IN
A/V1
A/V2
To wall outlet
TV
L - AUDIO - R
DC 12V IN
VIDEO
A/V Cable
OFF
ON
T
CH
Note : If the accessory cable are euro/scart, they are different cable for
transmitter and receiver. There has indicator on scart connector,
please follow the indicator to install.
For RCA cable they are identically.
please follow the indicator to install.
For RCA cable they are identically.