Wavenet Technology Pty Ltd. DWI800D Manuel D’Utilisation
Dualwave-I Modem User Manual __________________________________________________ Care & Maintenance
DWI10012WT31 35
Wavenet
Technology
How do I locate the LLI and serial numbers assigned to my modem?
The LLI and serial numbers are located in three places:
The LLI and serial numbers are located in three places:
On the package
On the label on the back of the modem
From the Modem Versions tab in the Modem Info application.
How do I check the modem settings?
The Modem Info application provides information about your modem
and the active settings. Select the Setup tab from Modem Info.
The Modem Info application provides information about your modem
and the active settings. Select the Setup tab from Modem Info.
I can’t get the modem to charge.
Confirm that iPAQ is fully inserted into the modem, the pair are fully
inserted into the iPAQ cradle and the battery charger power cable is
properly connected to the cradle.
Confirm that your battery charger is plugged into an AC outlet and that
the AC outlet has power.
How can I extend battery life?
You can extend battery life by:
You can extend battery life by:
Turning off the modem when you are not using it.
Selecting the Maximum Power Save option from the Modem
Info Setup tab if your network operator supports this feature.
Info Setup tab if your network operator supports this feature.
Does a weak RF signal affect battery life?
The battery usage estimates assume that the modem is switched on
between eight to ten hours a day and you are located in a good RF area.
The life of the battery charge may be considerably less if you are
operating your modem in a weak RF area.
The battery usage estimates assume that the modem is switched on
between eight to ten hours a day and you are located in a good RF area.
The life of the battery charge may be considerably less if you are
operating your modem in a weak RF area.
Can I still receive messages when the iPAQ and modem is charging?
Yes, messages can be sent and received when the iPAQ and modem
batteries are charging.
Yes, messages can be sent and received when the iPAQ and modem
batteries are charging.