Arescom Inc. AG1000PRO Manuel D’Utilisation
HARDWARE INSTALLATION
HARDWARE INSTALLATION
11
2.
HARDWARE INSTALLATION
CAUTION!!! Turn off all electronic devices, including your personal
computer, before you begin to connect and disconnect cables.
computer, before you begin to connect and disconnect cables.
2.1 Setup Instructions
• Choose a location for the AresGate router close to a power
outlet and nearby telephone outlet. Preferably, select a
convenient location that does not experience too much foot
traffic and is away from sunlight.
convenient location that does not experience too much foot
traffic and is away from sunlight.
• It is important to place the AresGate router in the center of all
your wireless devices.
• After locating the optimum spot for the router, place the
AresGate Router on a level surface – such as a desktop, shelf,
or table.
or table.
• Place the AresGate router on the predetermined surface, so
you can see the back panel for convenient cable connection.
2.2 Antenna Attachment
Step 1.
Tightly attach the included external antenna
to the antenna connector on the rear panel.
to the antenna connector on the rear panel.
2.3 Connect to the Ethernet
10BaseT LAN Interface Connection
Step 1.
Locate your Ethernet cable (included).
Step 2.
Attach the Ethernet cable to the 10BT LAN
connector of your AresGate router.
connector of your AresGate router.
Step 3.
Plug the other end of the Ethernet cable to your Ethernet
network.
network.