Arescom Inc. AG1000PRO Manuel D’Utilisation
BEFORE YOU BEGIN
4
AresGate 1000 User’s Installation Guide
• Up to 128-bit WEP (Wired Equivalent Privacy) encryption.
• DHCP server simplifies your network administration.
• Supports NAT/PAT firewall capability.
• IP filtering feature protects your network from unauthorized data
• DHCP server simplifies your network administration.
• Supports NAT/PAT firewall capability.
• IP filtering feature protects your network from unauthorized data
traffic that enters or leaves the router.
1.4 Package Includes
• Arescom AresGate 1000 wireless router (x 1)
• Power adapter and cord set (x 1)
• RJ-45 to RJ-45 straight-through Ethernet cable (x 1)
• RJ-11 to RJ-11 telephone cable (x 1)*
• External wireless LAN antenna (x 1)
• User’s Installation Guide
• Quick Installation Guide
• Power adapter and cord set (x 1)
• RJ-45 to RJ-45 straight-through Ethernet cable (x 1)
• RJ-11 to RJ-11 telephone cable (x 1)*
• External wireless LAN antenna (x 1)
• User’s Installation Guide
• Quick Installation Guide
1.5 Diagram of the AresGate 1000
Front Panel LEDs
Figure 1.
Front Panel Interface
PWR (Power)
A PWR LED is ON when power is supplied to the AresGate router.
DIAG (Diagnostic)
The yellow DIAG LED indicates that the AresGate router is in a self-
diagnostic mode during boot-up. Once the router is successfully
booted up, the DIAG LED remains off. If there is a software
malfunction or a problem with the router, the DIAG LED will remain
on.
diagnostic mode during boot-up. Once the router is successfully
booted up, the DIAG LED remains off. If there is a software
malfunction or a problem with the router, the DIAG LED will remain
on.
56K
*
The 56K LED displays the status of the built-in 56K analog modem.
The green LED is on and remains solid if the modem line successfully
connects between a remote carrier (such as your ISP) and the
AresGate router. The LED flashes when there is data activity on the
modem interface.
The green LED is on and remains solid if the modem line successfully
connects between a remote carrier (such as your ISP) and the
AresGate router. The LED flashes when there is data activity on the
modem interface.
*
For AresGate 1000 Pro model only