TopSeed Technology Corp. TSGH-2401 Manuel D’Utilisation

STEP 3

Connect the Receiver

The receiver relays input from your remote control to your computer.

To connect the receiver

With your computer turned on, plug the

   rectangular universal serial bus (ISB)
   connector into your computer’s USB
          port.

The Windows Vista™ and Windows® 7

OS will detect the

receiver and automatically install the
driver.

STEP 4

Adhesive Double Side Tape

4.1

Peel one side of protective paper from the
adhesive tape and affix the adhesive tape
to the bottom of the IR receiver housing.

4.2

Peel another side of protective paper from
the adhesive tape and affix IR receiver to
any flat surface (for example, table, TV
stand, monitor display, or computer desk)

STEP 5

Connect the IR Emitter

If you receive your TV signal through a set-top
box, you must connect an IR emitter (also
known as an IR control cable) to the receiver
to use the remote control for Media Center PC
with your TV. The receiver includes two IR
emitter ports; however, this package only
comes one IR control cable. You only need to
connect one emitter per set-top box.

To connect an IR emitter

5.1

Insert the plug at the end of an IR emitter cable into one of the ports on
the back of the receiver.

5.2 Peel the protective paper from the emitter end and affix the emitter to

the front of the IR sensor lens on the set-top box.
The IR sensor lens is typically visible on the front of the set-top box. If
you cannot find the IR sensor lens, see the documentation that came
with your set-top box.