Wistron Corporation MS2140BG Manuel D’Utilisation

 The installation instructions in this section are based on the following assumptions:

●     

The wireless adapter hardware has already been installed in the computer in 
accordance with the computer manufacturer's instructions.

●     

The computer has not been powered on since the hardware installation was 
completed.

●     

No other wireless LAN card is installed in this computer.

 To install the driver before installing hardware, use Start > Run and browse to the 

file SetupWLD.exe in the path PROW2200\WINXP on the Intel CD. After running 
SetupWLD.exe, shut down the computer and install the hardware. When the computer 
restarts, the driver will be automatically installed.

 Before proceeding, make sure that you are operating Windows XP with 

administrative rights. If you log in to Windows XP without administrative rights, you may 
run into problems during the installation. 

 The Intel(R) PROSet utility or the Windows XP wireless configuration feature can be 

used to configure wireless network settings. The instructions below include steps for 
installing the Intel(R) PROSet utility and for turning off the Windows XP configuration 
feature. If you do not turn off the Windows XP feature, you will not be able to use Intel(R) 
PROSet to configure wireless network settings. For information on how to use the 
Windows XP feature, see your Windows XP documentation.

To install drivers under Windows* XP, follow these steps:

1.  Power up the computer in which the wireless adapter hardware has just been 

installed.