BenQ Mobile GmbH & Co. OHG A70 Manuel D’Utilisation

Page de 32
Switch on/off, PIN entry
10
© Siemens
 A
G
 2004, E:\A
uf
tr
ag\Siemens\M
obilePhones\FCCs\a70\SUG\Dor
ado_Main.fm
left page (10)
 of A70 Dorado, 140mm, us-en, A31008-H2770-A1-4-7619 (24.10.2005, 10:58)
VA
R Language: am; V
A
R is
sue dat
e: 050920
Charge battery
The battery is not fully charged when de-
livered. Plug in the charger cable at the 
bottom of the phone, plug in the power 
supply unit to the mains power socket 
and charge for at least two hours.
Charging time
The charging time is 2 hours. Ambient 
temperature of 5 °C to 40 °C (41°F to 
104°F) (icon flashes as a warning when 
5 °C (9°F) above/below this). 
Switch on/off, PIN entry
Switch on/off
Press and hold On/Off/End key
B
to 
switch on or off.
Enter PIN
The SIM card can be protected with a 
4–8 digit PIN. Enter the PIN code using 
the number keys (the display shows a se-
ries of asterisks) If you make a mistake 
press 
§Clear§
. Confirm your input with 
§OK§
Logging on to the network will take a few 
seconds.
First time switching on phone, the time 
and date must be set.
Standby mode
When the name of the service provider/ 
logo appears on the display, the phone is 
in standby mode 
and ready for use.
Press and hold the On/Off/End key
B
to 
return to standby mode from any menu 
option.
Security
The phone and SIM card are protected 
against misuse by several security codes. 
Keep these confidential numbers in a safe 
place where you can access them again if 
required.
§Menu§ 
¢
Setup 
¢
Security 
¢
Codes
 
¢
Select a function.
PIN control
The PIN is usually requested each time 
the phone is switched on. You can deacti-
vate this feature but you risk unauthor-
ised use of the phone. Some service pro-
viders do not permit deactivation of the 
control.
Change PIN
You can change the PIN to any 4–8 digit 
number you may find easier to remember.
Change PIN2
(Displayed only if PIN2 is available)
Proceed as with 
Change PIN
.
Change phonecode
You define and enter the phone code 
(4–8 digits) when calling a phone code 
protected function (e.g.
Direct call
for the first time. It is then valid for all 
protected functions. If it is entered incor-
rectly three times the phone is locked. 
Contact the Siemens Service. 
Clear SIM card barring
If the PIN is entered incorrectly three 
times, the SIM card is barred. Enter the 
PUK (MASTER PIN) provided by your serv-
ice provider with the SIM card. If the PUK 
(MASTER PIN) has been lost, please con-
tact your service provider.