BenQ Mobile GmbH & Co. OHG AX72 Manuel D’Utilisation

 of AX72 Pegasus-DTC,  FUG, us-en A31008-H2860-A1-1-7619 (04.10.2005, 16:13)

© Siemens A

G

 2004, E:\A

uf

tr

ag\Siemens

\Mob

ilePhones\FCCs\ax72\FUG\P

eg

asus_Main.fm

VA

R Language: en; V

A

R is
sue dat

e: 050307

The battery is not fully charged when de-

livered. Plug charger cable into the bot-

tom of the phone, plug power supply unit 

into a mains power socket and charge for 

at least two hours. The power supply unit 

heats up when used for long periods. This 

is normal and not dangerous.

When charging is in progress 

h

 is 

displayed.
Charging time

An empty battery is fully charged after 

about 2 hours. Charging is only possible 

within a temperature range of +5°C to 

+40°C (41°F to 104°F). If the temperature 

rises/falls 5°C (9°F) above/below this, the 

charge symbol flashes a warning. The 

mains voltage specified on the power 

supply unit must not be exceeded 

(Operating time, p. 40). 
Charge icon not visible

If the battery has been discharged fully 

the charge icon is not immediately visible 

when the power supply unit is plugged 

in. It will appear after up to two hours. In 

this case the battery is fully charged after 

3-4 hours.
Only use the power supply unit provided!

Charge level display during operation 

(empty–full): 

a d g

. 

A beep sounds when the battery is nearly 

empty. The charge level of the battery is 

only displayed correctly after an uninter-

rupted charging/discharging cycle. You 

should therefore not remove the battery un-

 and where possible not termi-

.

Press and hold the On/Off/End key 

B

 to 

switch on or off.

The SIM card can be protected with a 

4- to 8-digit PIN.
Enter the PIN using the number keys. The 

characters 

****

 appear to ensure no-

body can read your PIN on the display. 

Correct errors with 

. 

Confirm your input with 

. Logging on 

to the network will take a few seconds.

By pressing the soft key 

 you can 

make an emergency call on any network 

 a SIM card and without entering a 

PIN (not available in all countries).

Set the clock to the right time once at 

start-up.
Press 

. First enter the date (day/

month/year), then the time (24 hours, 

including seconds). Press 

. The time 

and date are updated.
If the battery is removed for longer than 

30 seconds, the clock will be reset. 

Set the time zone for your area.
Select the required time zone from list 

with 

G

. Apply with 

.