Netgear 10300137 Manuel D’Utilisation

This screen shows the following statistics:

Viewing Attached Devices

The Attached Devices screen shows all IP devices that the router discovered on the local 
network. From the main menu, under the Maintenance heading, select Attached Devices:

For each device, the table shows the IP address, device name if available, and the Ethernet 
MAC address. If the router is rebooted, this data is lost until the router rediscovers the 
devices. To force the router to look for attached devices, click the Refresh button.

Viewing, Selecting, and Saving Logged Information

The router logs security-related events such as denied incoming service requests, hacker 
probes, and administrator logins. If you enabled content filtering in the Block Sites screen, 
the Logs screen can show you when someone on your network tries to access a blocked site. 

Connection Status

The status of the Internet connection.
• Scanning. The modem is scanning for broadband wireless 

networks in your area.

• Connected. The router is connected to the Internet.
• No USB Device Attached. The router does not detect a USB 

modem connected to its USB port. Either the modem is 
disconnected, or it is not correctly seated. To correct the problem 
remove the modem and reinsert it into the port.

Received Signal Quality (in dbm)

Modem radio reception. A small, negative number indicates good 
signal quality.

Bytes Transmitted

The number of bytes transmitted in the most recent connection 
session.

Bytes Received

The number of bytes received in the most recent connection session.

Tx B/s

The transmission rate.

Rx B/s

The receiving rate.

System Uptime

Time elapsed since the last reboot.

Connection Duration

The time elapsed since the most recent connection to the Internet.

Available Networks

The broadband wireless networks available in your area.