Netgear 10300137 Manuel D’Utilisation

Be sure to change the router default password to a very secure 

password. The ideal password should contain no dictionary words from 
any language, and should be a mixture of letters (both upper-case and 
lower-case), numbers, and symbols. Your password can be up to 30 
characters.

Configuring Remote Management

Log in to the router. Type http://www.routerlogin.net in the address field of your 
Internet browser. Enter admin

 for the user name and your password (or the default, 

)

.

Under the Advanced heading, select Remote 
Management:

Select the Turn Remote Management On 
checkbox.

Specify which external addresses will be allowed 
to access the router’s remote management.

For security, restrict access to as few external 
IP addresses as practical:

To allow access from any IP address on the 

Internet, select Everyone. 

To allow access from a range of IP 

addresses on the Internet, select IP address range. 
Enter a beginning and ending IP address to define the allowed range. 

To allow access from a single IP address on the Internet, select Only This Computer. 

Enter the IP address that will be allowed access. 

Specify the port number that will be used for accessing the router menu.

Access normally uses the standard HTTP service port 80. For greater security, you can 
enter a different port number. Choose a number between 1024 and 65535, but do not use 
the number of any common service port. The default is 8080, which is a common 
alternate for HTTP.

Click Apply to have your changes take effect.

When accessing your router from the Internet, type your router WAN IP address in your 
Internet browser address or location field, followed by a colon (:) and the custom port 
number. For example, if your external address is 134.177.0.123 and you use port number 
8080, enter:

In this case, you must include http:// in the address.