Netgear 10300137 Manuel D’Utilisation
Appendix A: Factory Default Settings and Technical Specifications
|
75
A.
Factory Default Settings and Technical
Specifications
A
Factory Default Settings
You can use the Restore Factory Settings button located on the bottom of your router to reset
all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the
factory configiuration settings that are shown in the following table.
all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the
factory configiuration settings that are shown in the following table.
Feature
Default Behavior
Router
login
login
User login URL
http://www.routerlogin.net or http://www.routerlogin.com
User name (case sensitive)
admin
Login password (case sensitive)
password
Internet
Connection
Connection
WAN MAC address
Use default address
WAN MTU size
1492
Port speed
AutoSense
Local
network
(LAN)
network
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ Disabled
Time zone
PST for North America, GMT for other locations
Daylight saving time adjustment
Disabled