Microsoft Corporation RM-530X Manuel D’Utilisation

1. Download and install the Nokia Software Updater

application to your PC.

2. Connect your device to the PC using a USB data cable,

and start the Nokia Software Updater application. The

Nokia Software Updater application guides you to back

up your files, update the software, and restore your

files.

If you forget any of the access codes, contact your service

provider.
• Personal identification number (PIN) code — This code

protects your SIM card against unauthorised use. The

PIN code (4 to 8 digits) is usually supplied with the SIM

card. After three consecutive incorrect PIN code entries,

the code is blocked, and you need the PUK code to

unblock it.

• UPIN code — This code may be supplied with the USIM

card. The USIM card is an enhanced version of the SIM

card and is supported by UMTS mobile phones.

• PIN2 code  — This code (4 to 8 digits) is supplied with

some SIM cards, and is required to access some

functions in your device.

• Lock code (also known as security code) — The lock

code helps you to protect your device against

unauthorised use. The preset code is 12345. You can

create and change the code, and set the device to

request the code. Keep the new code secret and in a

safe place separate from your device. If you forget the

code and your device is locked, your device will require

service and additional charges may apply. For more

information, contact a Nokia Care point or your device

dealer.

• Personal Unblocking Key (PUK) code and PUK2

code — These codes (8 digits) are required to change a

blocked PIN code or PIN2 code, respectively. If the codes

are not supplied with the SIM card, contact the operator

whose SIM card is in your device.

• UPUK code — This code (8 digits) is required to change

a blocked UPIN code. If the code is not supplied with

the USIM card, contact the operator whose USIM card is

in your device.

To prevent unauthorised use of your device, you can lock

your device and memory card remotely using a text

message. You must define the message text, and to lock

your device, send that text message to your device. To

unlock your device, you need the lock code.
To enable remote locking and to define the text message

content to be used, select 

 > 

 and

 > 

 > 

 > 

 > 

 > 

. Enter the

text message content (5 to 20 characters), verify it, and

enter the lock code.

Many features in your device increase the demand on

battery power and reduce the battery lifetime. To save

battery power, note the following:

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black

2009-06-25 13:13:44 P3657 user guide publication 3