Summer Infant 248T Manuel D’Utilisation

For added convenience and portability, you can 

clip the Parent’s Unit to your belt or waistband 

using the Belt Clip on the back.

Step 2: 

Press and hold

 the power button on front of Baby’s Unit for 

1 second

 to turn on. Baby’s Unit will glow blue once power is on.

Step 2: 

Press and hold

 the power button on front of Parent’s Unit for 

1 second

 to turn on. 

Button will glow blue once power is on.

•Out of Range Indicator: Parent’s Unit will sound 3 consecutive beeps  

  until unit is back in range.

• Low Battery Indicator: Once battery has between 10 - 30 minutes   

  remaining (depending on volume setting), Parent Unit’s Power LED will  

  flash blue.

Note: This digital monitor set is pre-synched with security codes for 

privacy reasons. However, there are instances that the Baby and Parent 

unit will lose its code and may require you to re-synch it.

Step 1: Connect the Baby unit to its power supply and make sure unit is 

powered OFF.

Step 2: Turn ON the Parent unit.

Step 3: Press and keep holding  the “-“ button and  at the same time 

press the “+” button for about 3 seconds. A continuous audible BEEP and 

blue flashing lights will occur. The Parent unit is now ready to be synched.

Step 4: Within 20 seconds, turn on the Baby unit. A single BEEP will emit 

from the Parent unit to signify successful synching.

You should be able to clearly hear all levels of sound coming from the 

Baby’s Unit through the Speaker on the Parent’s Unit. Digital technology 

will automatically scan and select a free and secure channel so you only 

hear your baby. If no sound comes from the 

Speaker of the Parent’s Unit, check to make sure 

all cords are fully plugged in and connected and 

battery is 

charged

. Also, make sure both units are 

turned on.