Digital Antenna DA4500 Manuel D’Utilisation
,
User Instructions
Model:DA4500
Cellular Amplifier
Cell Amplifier instructions
1) Mount the amplifier in a suitable location.
It should be mounted three
feet away from normally occupied areas.
DO NOT APPLY POWER TO
THE AMPIFIER. If hard wiring to a power block, the positive lead connects
to the center pin of the amplifier power connector.
to the center pin of the amplifier power connector.
2) Antenna mounting. Mount antenna in a secure fashion with the
following constraints. When using a unity gain vehicle mount antenna, the
external antenna must be located at least 16 inches from occupants.
When using an external high gain antenna, antenna gain is 2dBi.
These
following constraints. When using a unity gain vehicle mount antenna, the
external antenna must be located at least 16 inches from occupants.
When using an external high gain antenna, antenna gain is 2dBi.
These
guidelines comply with FCC rules concerning MPE (Maximum Permissible
Exposure) safety limits. Install the antenna coaxial cable in a suitable path and connect to
the amplifier connector marked "antenna".
the amplifier connector marked "antenna".
3) Connect one end of the cell phone adapter cable to the amplifier where it
is marked "phone" and the other end to the cell phones antenna port.
is marked "phone" and the other end to the cell phones antenna port.
4) After you are certain that all connections are tight and secure, insert the
power cable’s plug into the power connector. A green light will illuminate
indicating that the amplifier is ready for use.
power cable’s plug into the power connector. A green light will illuminate
indicating that the amplifier is ready for use.
Warning: Changes or modifications not expressly approved by Digital Antenna,
Inc. could void the user's authority to operate the equipment.
Inc. could void the user's authority to operate the equipment.
Digital Antenna Inc.
5325 NW 108 Ave
Phone 954.747.7022
WWW.digitalantenna.com
Sunrise, FL 33351
fax 954.747.7088