Maxon Electronics Australia Pty. Ltd. MM-5500SU Manuel D’Utilisation
FCC Documentation
MM-5500SU CDMA 1X/EVDO Modem
7/7
Confidential and proprietary information.
This document is the sole and exclusive property of Maxon Australia.
Not to be distributed or divulged without prior written agreement.
This document is the sole and exclusive property of Maxon Australia.
Not to be distributed or divulged without prior written agreement.
3. Specifications
3.1 Mechanical Specifications
Table 1. Mechanical specifications
Dimensions
93mm x 79mm x 27mm, include projecting connect parts
Weight
Approx. 110g , except CDMA antenna and cable assemblies
Housing Material
CASE – SCM4 , SCM45C , Brackets – AL5052
3.2 Environment Specifications
Table 2. Environment specifications
Power supply voltage
DC +5V(minimum) ~ +9V(maximum) on idle state
DC +5V(minimum) ~ +7V(maximum) on communication
Operating conditions
0°C ~ +60°C , 85%(at 50(C), relative humidity (non-condensing)
Storage Temperature
-40°C ~ +70°C
3.3 Electrical Specifications
Table 3. Current Consumption (Test condition: power supply=+5V, Temp.= 25°C )
Maximum current
Under 1.0A
Digital block operating voltage
+3.0V (typical)
On communication @ Maximum TX Power (24+/- 0.3dBm)
with USB data communication
Under 800mA
Power down state
- LED off, Modem sleep state
Under 30mA
(Note) The current consumption might vary of 5% over the whole operating temperature range.
3.4
USB specifications
The USB interface implemented in the MM-5500SU Wireless Modem complies with the
Universal Serial Bus (USB) Specification Revision1.1.
3.5 CDMA RF Specifications
RF performances are compliant with IS-95A/B, cdma2000-1X/EVDO Protocol.