AeroScout ANT4200 Manuel D’Utilisation
AeroScout EX4200 Ultrasound Exciter
Connecting the Exciter to the Network and Power Source
12
110/220 VAC to 48VDC PoE Single-Port Injector
The PoE Single Port Injector converts 110/220VAC to 48VDC. In addition, it can
receive a network connection and enable the installer to run a single cable to the
Exciter’s LAN connector, thus supplying both power and network connectivity.
The PoE Single Port Injector converts 110/220VAC to 48VDC. In addition, it can
receive a network connection and enable the installer to run a single cable to the
Exciter’s LAN connector, thus supplying both power and network connectivity.
When using this injector, the power jack of the Exciter will not be used.
Figure 5: Single-Port Injector
The injector’s IN connector is connected to the network. The injector’s OUT
connector is connected to the Exciter’s LAN connector (connector 1 in Figure 2).
connector is connected to the Exciter’s LAN connector (connector 1 in Figure 2).
The injector can be used for both networked and non-networked Exciters. In case of
a non-networked Exciter, the IN connector on the injector is not used.
a non-networked Exciter, the IN connector on the injector is not used.
Note
An injector can provide enough power for one Exciter only. When using the
injector with chained Exciters, an injector must be connected to every single
Exciter in the chain. In addition, the LAN connectivity that the injector
supplies, is not to be utilized for slave Exciters in a chain.
injector with chained Exciters, an injector must be connected to every single
Exciter in the chain. In addition, the LAN connectivity that the injector
supplies, is not to be utilized for slave Exciters in a chain.
110VAC/220VAC to 48VDC Power Supply Adaptors
These adaptors convert 110VAC or 220VAC inputs to 48VDC
These adaptors convert 110VAC or 220VAC inputs to 48VDC