AeroScout ANT4200 Manuel D’Utilisation
AeroScout EX4200 Ultrasound Exciter
Deployment Considerations
28
Deployment Considerations
The section provides recommendations on how to deploy the Exciter to prevent
leakage beyond the confines of the room and avoid poor coverage of the room area.
leakage beyond the confines of the room and avoid poor coverage of the room area.
When mounting a single EX4200 Exciter, either mount it on the same wall as the
entrance door or on the ceiling above it. The speaker should be directed away from
the door, towards the opposite wall. The following figure illustrates the case.
entrance door or on the ceiling above it. The speaker should be directed away from
the door, towards the opposite wall. The following figure illustrates the case.
Medium room size: 7x4.6x2.6m
Exciter is installed on
the wall or ceiling far
from the door
Max leakage 1.5m
Acute angle
Tag
Power=2 (high)
Figure 25: Exciter deployment consideration
In larger rooms that cannot be covered by one Exciter, install two Exciters on the
same wall, a few meters apart. Make sure their effective range overlap. The Exciters
should be configured with Enable Multiple Ultrasound Exciters usage in the
room=Yes (check the box). The following figure illustrates the case.
same wall, a few meters apart. Make sure their effective range overlap. The Exciters
should be configured with Enable Multiple Ultrasound Exciters usage in the
room=Yes (check the box). The following figure illustrates the case.