AeroScout BS2020-0 Manuel D’Utilisation
Page 6 of 7
AT UG 081103 AKB
1. Link – Yellow LED indicating an active Ethernet connection.
2. Status – Red LED indicating the status of the Location Receiver as follows:
2. Status – Red LED indicating the status of the Location Receiver as follows:
• Blinking Mode 1 – the LED is blinking in 1 second duty cycle:
1. The unit was not configured by the Location Engine.
2. Unit configured but doesn't receive 802.11b messages.
2. Unit configured but doesn't receive 802.11b messages.
• Blinking Mode 2 – Normal mode, the LED blinks shortly on each correct received
and decoded 802.11b message.
3. POWER – Green LED indicating that the unit is connected to power.
Installation:
Location Receivers communicate with the AeroScout Location Server via standard Ethernet
or wirelessly over a Wi-Fi network – no dedicated location network cabling is required.
Location Receivers also support Power over Ethernet, eliminating costly electrical
installation. Configuration is simple, as well: The installer executes all setup tasks from the
Location Server’s System Manager software, which records the placement of a Location
Receiver with a single mouse click.
or wirelessly over a Wi-Fi network – no dedicated location network cabling is required.
Location Receivers also support Power over Ethernet, eliminating costly electrical
installation. Configuration is simple, as well: The installer executes all setup tasks from the
Location Server’s System Manager software, which records the placement of a Location
Receiver with a single mouse click.