CipherLab Co. Ltd. 1664 Manuel D’Utilisation

 

 

103

 

Update 

 

Chapter 3

    錯誤!  使用  [常用]  索引標籤將 Heading 1 套用到您想要在此處顯示的文字。

 

Authentication 

When any changes are made to authentication and PIN code on the scanner side, you will have to 

remove the scanner from the paired device list (called unpairing) and go through the whole process 

to re-establish the connection. 

The scanner allows up to 16 characters for a PIN code and provides two options for authentication: 

Enable Authentication with Preset PIN 

Have the scanner read the “Use preset PIN” barcode, and change the preset PIN if necessary. 

This means you will have to enter exactly the same string for your computer or PDA to connect 

to the scanner. If the PIN or passkey is incorrect, any connection attempt will be turned down by 
the scanner. See step 8 in 

3.2.3 Connect to Dongle

. 

1.  Read the “Use preset PIN” barcode to enable authentication with a preset PIN. 

2.  Read one of the barcodes to specify the PIN code, in decimal or hexadecimal. 

By default, the PIN code is set to “0000”. Maximum 16 characters are allowed. 

3.  Read the “

Decimal Value

” barcode on page 251 or the “

Hexadecimal Value

” barcode on 

page 252 for the desired digits or character string. 

Read the “Clear PIN Code” barcode first if you need to re-input the PIN code. 

4.  Read the “Validate” barcode to complete this setting. 

Enable Authentication with Random PIN or No Authentication 

By default, it is set to “No PIN or use random PIN”, which depends on the setting of the target 

device. (No PIN = No authentication.)