CipherLab Co. Ltd. 8300WB Manuel D’Utilisation

 

8

Other barcodes must be enabled through programming. 

2.  Buzzer 

To test the buzzer with different Frequency/Duration. Press ENTER key to start and then 
press any key to stop the test.   

3.  LCD & LED 

To test LCD display and LED indicator. Press ENTER key to start and then press any key 
to stop the test. 

4.  Keyboard 

To test the rubber keys. Press a key and the result will be shown on the LCD display. Note 
that the FN key should be used in conjunction with numeral keys. 

5.  Memory 

To test the data memory (SRAM). Note after the test, the contents of the memory space will 
be wiped out. 

  4. Memory 

1. 

 

Information includes sizes of the base memory (SRAM), memory card (SRAM) and 
program memory (FLASH) in the unit of kilobytes. 

2.  Initialize 

To initialize the data memory (SRAM). Note the contents of the data space will be wiped 
out after memory initialization. 

  5. Power 

Show the voltages of the main battery and backup battery. 

  6. Load Application 

To download the application program, BASIC run-time or font file. There are three interfaces 
supported by the system, namely, the Direct-RS232, Cradle-IR and standard IrDA. 

  7. Bluetooth Menu 

This item will be shown only if the Bluetooth module is installed. The Bluetooth menu includes 
the following items: 

1.  Information 

2.  IP Setting 

3.  BNEP Setting