HydroPoint data systems inc. WT008 Manuel D’Utilisation
By inserting a minimum soak time between the irrigation cycles, the
irrigation water is allowed to soak into the soil before the next cycle
begins.
irrigation water is allowed to soak into the soil before the next cycle
begins.
Note:
Some soak times may be longer than the minimum soak time
that you set because other stations may be completing their cycle run
times before the station can return to watering.
times before the station can return to watering.
Set Water Days
1.
1.
Turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to the desired watering day type:
•
Let Me Set Water Days (Default Setting),
•
Water 7 Days Per Week, or
•
Set Water Day Intervals.
“Let Me Set Water Days” allows you to set which days of the
week the controller will irrigate. You can choose different days
for each month of the year.
week the controller will irrigate. You can choose different days
for each month of the year.
•
“Water 7 Days Per Week” irrigates every day, or
•
“Set Water Day Intervals” allows you to set a regular
interval for irrigation. For example, if you set a water day
interval of “2,” the controller will irrigate every other day. If
you set a water day interval of “7,” the controller will water
every seven days or once a week, etc.
interval for irrigation. For example, if you set a water day
interval of “2,” the controller will irrigate every other day. If
you set a water day interval of “7,” the controller will water
every seven days or once a week, etc.
The choices for “SET WATER DAYS” are shown below.
For “Let Me Set Water Days”:
1.
1.
Turn the Upper Line dial until you see:
The lower line of the display shows the default settings
for January.
for January.
Jan S M T W T F S STA 02
Y - - Y - - -
SET WATER DAYS STA 02
Let Me Set Water Days
Programming Your WeatherTRAK ET Plus
45
4.
Turn the Lower Line dial to the desired tenths of minutes
(Turn to 8):
(Turn to 8):
•
0 to 9.
This is what the display looks like when the cycle time is set to
25.8 minutes.
25.8 minutes.
Set Number of Cycles
1.
1.
Turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to the desired number of cycles (00
turns station OFF):
turns station OFF):
•
00 to 20 (Default Setting: 01).
Set Soak Time
1.
1.
Turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to the desired soak time:
•
0 to 480 in 10-Minute increments (Default Setting: 30).
Note:
Due to the nature of some soils, it is important that you
apply water in short cycles to prevent irrigation water from
running off the landscape area onto pavement, roadways, or
other areas.
running off the landscape area onto pavement, roadways, or
other areas.
SET SOAK TIME STA 02
30 Minutes
SET # OF CYCLES STA 02
01 Cycles/Operating Day
SET CYCLE 10ths STA 02
25.8 Minutes
Programming Your WeatherTRAK ET Plus
44