Fiber-Span LLC AC-3101-BTR Manuel D’Utilisation
A1471 User Manual
Introduction
This high performance Analog RF Fiber Optic Transmission System converts RF
signals into intensity modulated light to be carried through standard single mode
optical fiber to the Optical Receiver. The Receiver converts the modulated light
back to the original RF signal. Fiber-Span uses high performance optical
components to ensure maximum dynamic range.
signals into intensity modulated light to be carried through standard single mode
optical fiber to the Optical Receiver. The Receiver converts the modulated light
back to the original RF signal. Fiber-Span uses high performance optical
components to ensure maximum dynamic range.
1
Warnings
Warning: Invisible radiation exits from areas labeled “Aperture”
A US standard 120V AC 60 Hz to 12VDC power supply powers the units. Use
precautions to prevent electrical shock hazards. Always terminate the RF
connections before applying power to the unit.
precautions to prevent electrical shock hazards. Always terminate the RF
connections before applying power to the unit.
2
Product overview
The optical transmission system is comprised of one AC3101-BTR-4 base subrack
with four AC300T and four AC300R modules internally installed and front panel
LED power indicator, and four AC3101-BTR-RM remote Nema Type 4X
enclosures. Each AC3101-BTR-RM contains one AC106 fiber optic transceiver,
one FS-LNA1 low noise amplifier, one FS-PA1 power amplifier, one band pass
filter, one low pass filter, and one removable 3dB RF attenuator. In addition, both
the subrack and remote units are supplied with an external power supply and
locking cable, which is interchangeable between units of all types.
with four AC300T and four AC300R modules internally installed and front panel
LED power indicator, and four AC3101-BTR-RM remote Nema Type 4X
enclosures. Each AC3101-BTR-RM contains one AC106 fiber optic transceiver,
one FS-LNA1 low noise amplifier, one FS-PA1 power amplifier, one band pass
filter, one low pass filter, and one removable 3dB RF attenuator. In addition, both
the subrack and remote units are supplied with an external power supply and
locking cable, which is interchangeable between units of all types.
3
Installation
This transmission system is designed to be setup by professional
communications systems installers. System installers should be from, a
public utility, Nuclear Power Plant, or other qualified personnel.
communications systems installers. System installers should be from, a
public utility, Nuclear Power Plant, or other qualified personnel.
The AC3101-BTR-4 subrack is compatible with a standard 19” 1U rack, and
mounts on the rack system using standard hardware and practices. AC3101-BTR-
RM remote units should be mounted securely using the four enclosure mounting
holes provided. AC3101-BTR-RM units should be mounted flat against a wall or
column with the long dimension perpendicular to the floor, hinge on the left,
mounts on the rack system using standard hardware and practices. AC3101-BTR-
RM remote units should be mounted securely using the four enclosure mounting
holes provided. AC3101-BTR-RM units should be mounted flat against a wall or
column with the long dimension perpendicular to the floor, hinge on the left,