Sify Technologies Ltd SMAC-5700 Manuel D’Utilisation

User Operating Manual

 

 

 

Sify Technologies LTD  

Page 12 

The default operating mode is Outdoor Base for AP hardware and Outdoor Subscriber for SU 
hardware. Device will not assign an IP address to the 
computer/notebook. Therefore, follow the steps to assign an 
IP address to your Ethernet card. 

In order to configure SMAC5700, please follow the 
instruction below: 

1. In the Control Panel, double click Network Connections 
and then double click on the connection of your Network 
Interface Card (NIC). You will then see the following 
screen. 

 

2. Select Internet Protocol (TCP/IP) and then click on the 
Properties button. This will allow you to configure the TCP/IP settings of your PC/Notebook 

 

3. Select Use the following IP address radio button and then 
enter the IP address and subnet mask. Ensure that the IP 
address and subnet mask are on the same subnet as the 
device. 

 

4. Click on the OK button to close this window, and then 
close LAN properties window. 

 

 

IP Address entered in the TCP/IP Properties needs to be at the same subnet of the 
SMAC5700 IP Address. For example: SMAC5700’s default IP Address is 192.168.1.1 so the 
IP Address in the TCP/IP settings could be 192.168.1.10. 

After complete the IP settings from last section, you can now access the web-based 
configuration menu. 

1. Open web browser.