ZTE Corporation EUFI891 Manuel D’Utilisation
Connecting to the Internet
With your ZTE Unite, a wireless Internet connection can always be at your fingertips.
Connecting Wi-Fi Enabled Devices To Your ZTE Unite
NOTE:
It is recommended the battery be fully charged in order to use your ZTE Unite via Wi-Fi
for the first time, or connect the device to the wall adapter for power.
The following should occur once you power on your ZTE Unite:
Your ZTE Unite is powered as soon as you slide the Power Switch to On and the display
lights up.
Once your ZTE Unite is powered on and has been activated, it automatically connects to the
Internet provided that Mobile Broadband service is available and one or more Wi-Fi devices
are connected.
The Service (4G LTE, 3G, and 1X), Signal Strength
, and Data Connected
icons on
your ZTE Unite indicate it is in service and ready to connect.
Follow these Steps
:
1.
Use your normal Wi-Fi application on your computer to establish a connection to your ZTE
Unite.
2.
Look for the network (SSID) named “USCC-EuFi891”. There are XXXX digits unique to
your ZTE Unite following the network (SSID) name displayed.
3.
Click Connect and enter the default password printed beside the battery compartment of your
ZTE Unite.
NOTE:
Your password will also be displayed on the ZTE Unite screen each time the ZTE Unite
is powered on.
Accessing the Internet
After successfully establishing the connection between your ZTE Unite and Wi-Fi clients, you
can access the Internet in the Auto Connect, Manual Connect mode. The default mode is Auto
Connect
can access the Internet in the Auto Connect, Manual Connect mode. The default mode is Auto
Connect
.