ZTE Corporation ZXR10W200A Manuel D’Utilisation
Error! Style not defined.
Error! Style not defined.
B-5
Tips:
Signals and Ethernet cable wiring are defined & designed based on the interface signals
of ZTE's AC. If a 3rd-party AC is employed, the wiring of Ethernet cables should be
decided according to the practical situations.
B.2.4 Ethernet Cable Labels
After the crimping of an Ethernet cable, a label should be attached to End A and B,
labeling the name and length of the Ethernet cable.
1. Label of straight-through Ethernet cables
The label of straight-through Ethernet cables (RJ45) is shown as in Figure B.2-1.
Figure B.2-1 Label of Straight-through Ethernet Cables
"**m" in the above figure indicates the physical length of the Ethernet cable.
2. Label of PoE Ethernet Cables
The label of PoE Ethernet cables (C-RJ45-001) is shown as in Figure B.2-2.
Figure B.2-2 Label of PoE Ethernet Cables
"**m" in the above figure indicates the physical length of the Ethernet cable.
"PoE Cable" tells that this cable is a PoE Ethernet cable.
3. Label of crossover Ethernet cables
The label of crossover Ethernet cables (RJ45) is shown as in Figure B.2-3.
RJ45J **m
Figure B.2-3 Label of Crossover Ethernet Cables