Marasst Incorporation 05001 Manuel D’Utilisation
17
Engli
sh
Setting Channels for Multiple Camera Use
The GA-253 video monitor/receiver can receive audio
and video signals from up to four separate cameras/
and video signals from up to four separate cameras/
transmitters. Additional GA-253 cameras/transmitters
can be purchased from your dealer.
Follow the instructions below to set up channels for
multiple transmitters.
multiple transmitters.
1. Assemble and install each of the cameras as
2. Set the channel of the first camera to channel 1
by pressing the channel selector button until the
first channel indicator LED is lit.
first channel indicator LED is lit.
3. Set the second camera to channel 2. If you have a
third and fourth camera, set them to channels 3
and 4 respectively.
and 4 respectively.
4. Turn on the video monitor/receiver.
5. Check the reception of each channel by pressing
5. Check the reception of each channel by pressing
the channel selector button on the video monitor.
If the audio or video signal of a channel is
unclear, adjust the antenna angle of the camera
corresponding to that channel. Refer to the Trou-
bleshooting section on page 21 for more infor-
mation.
If the audio or video signal of a channel is
unclear, adjust the antenna angle of the camera
corresponding to that channel. Refer to the Trou-
bleshooting section on page 21 for more infor-
mation.