Mobilicom ltd. MCU-100 Manuel D’Utilisation
MC-EMA Product Description and Operational Manual
Page : 21 / 22
7.2 Professional Installation Attestation
MOBILICOM (the manufacturer) addresses the following items to ensure that the above
referenced equipment is professionally installed:
1. The MCU-100 will only be sold by MOBILICOM or one of its authorized dealers.
MOBILICOM and its authorized dealers will be under strict marketing control and will
only market and sell the MCU-100 to professionals.
2. Professional installation is required for the MCU-100 and will be performed only by
someone knowledgeable of its use.
3. MOBILICOM will ensure that the MCU-100 is only marketed and sold to professionals.
4. The MCU-100 is not sold to the general public and is sold only for industrial or
commercial use by professional installers.
5. List of approved antennas and power settings used shown on FCC grant. Installer
shall be responsible for ensuring that the proper antenna is employed so that the limits
in FCC Part 15 are not exceeded.
6. Power Feed:
a) The device can be powered only via battery and not via AC/DC transformer.
b) The device can be marketed as battery powered only.
c) Communication and power harness can be supplied by Mobilicom as an auxiliary
cable, but can also
be manufactured according to Mobilicom’s spec. The cable
should contain at least a 1GE and one power as a minimum, yet it is
recommended that the RS232 will be added as well. The Power line must contain
a 4A fuse.
d) Voltage Regulation:
33% =(12-9)/9*100%
e) Battery Types that can be used:
Voltage:
12VDC
Max Current:
3A
Recommended AH: 24AH (for 8 hours operation)