SHENZHEN WEIKING TECHNOLOGY CO. LTD BT48S Manuel D’Utilisation
SHENZHEN WEIKING TECHNOLOGY CO.,LTD
BT48S User Manual
BT48S User Manual
______________________________________________________________________________________________
版本: 1.0
版本: 1.0
页次
: 3
1.3 Weight: Body: 935g ± 10g; base: 505g ± 10g 。:
2.
Electrical Specifications:
3.1
Bluetooth Compatibility:
The meet Bluetooth4.0 Class II support the A2DP V1.2, AVRCP V1.4profiles
agreement.
3.2
agreement.
3.2
Transmission distance: 10 m (transmission distance will be different due
to different environmental conditions and different smart phone Bluetooth
device)
device)
3.3
channels: two channels
3.4
signal to noise ratio S / N: ≥ 80dB
3.5
Frequency Range: 180Hz-20 KHz
3.6
Distortion THD: ≤ 1%
3.7
speaker unit: diameter 45mm, inner magnet, 8 ohms, 5W
3.8
Parameters of power:
Rated voltage: DC 12V/3A
Power adaptor:Input AC100-240V_50/60Hz 0.8A
Power adaptor:Output DC12V/3A
4. Instructions:
Connect with the adaptor, the LED light flashes red under power on statue
4.1 Bluetooth function
4.1 Bluetooth function
4.1.1 long press for 3 sec to turn on the speaker,the red light is off
and the speaker will automatically turns to the Bluetooth mode;
When the blue LED flashes rapidly, it’s under searching mode
4.1.2 Active the Bluetooth on the device, it will enter the searching mode ,
Bluetooth device will find the “Sangha 48” , choose this device and connect it ( if
the device require the pass code , please enter ”0000”, normally the smart
phone no need enter pass code, some of cell phone require this ). If the paring
is successful, the blue led light flashes slowly, it takes 1 minute for pairing. It
the device require the pass code , please enter ”0000”, normally the smart
phone no need enter pass code, some of cell phone require this ). If the paring
is successful, the blue led light flashes slowly, it takes 1 minute for pairing. It