Cardo Systems AWHS01 Manuel D’Utilisation
Headset and phone will automatically be
established.
established.
Mute Mode
While a call is in progress, press briefly
the MUTE/SET button. You will hear a
tone indicating that you are in Mute mode,
during which you continue to hear the
other party, but your voice will not be
heard on the other end. Press the
MUTE/SET button again to cancel Mute
mode.
While a call is in progress, press briefly
the MUTE/SET button. You will hear a
tone indicating that you are in Mute mode,
during which you continue to hear the
other party, but your voice will not be
heard on the other end. Press the
MUTE/SET button again to cancel Mute
mode.
Volume Increase and Decrease
Press the volume buttons to increase/
decrease volume. Every distinct press
changes the audio level. Every increase/
decrease is followed by a short beep.
When the volume has reached the
maximum/minimum level, no further
beeps are heard. Continuous pressing on
the volume button will continuously
increase/decrease the volume.
Press the volume buttons to increase/
decrease volume. Every distinct press
changes the audio level. Every increase/
decrease is followed by a short beep.
When the volume has reached the
maximum/minimum level, no further
beeps are heard. Continuous pressing on
the volume button will continuously
increase/decrease the volume.
Transferring audio from Headset to
phone and vice versa
If you disconnect your Adapter from your
mobile phone (by pulling the audio jack),
the link between the allways
phone and vice versa
If you disconnect your Adapter from your
mobile phone (by pulling the audio jack),
the link between the allways
™
Headset
and BT Adapter will be automatically
disconnected.
disconnected.
10. Reading indicators with the
allways
allways
™
BT Adapter & Headset
Visual Indicators
Light Indicator flashes red and blue
(every 3-5 seconds)
Low Battery indicator
Light Indicator flashes red and blue
(every 3-5 seconds)
Low Battery indicator
Blue Light Indicator flashes rapidly
allways
allways
™
device is in pairing mode
Light Indicator flashes slowly red and
blue
allways
blue
allways
™
device is paired to another
device. Same indication is shown even if
the other device is turned off
the other device is turned off
Light Indicator is steady red
allways
allways
™
charging is in progress and not
yet completed
Blue steady Light Indicator
allways™ is connected to charger and
battery is fully charged
allways™ is connected to charger and
battery is fully charged
Red Light Indicator of BT Adapter flashes
BT Adapter failed to perform pairing
BT Adapter failed to perform pairing
Audio Indicators (
at Headset side only
)
Short beeps
Every increase/decrease in volume is
followed by a short beep. If volume can
not be further increased/decreased, no
beeps will be heard.
Every increase/decrease in volume is
followed by a short beep. If volume can
not be further increased/decreased, no
beeps will be heard.
Adapter
24 †Headset Manual