Cardo Systems ER01 Manuel D’Utilisation
scala-rider manual
DRAFT APRIL 25, 2005
Page 11 of 31
4.2.2 Removing the headset from the helmet.
The clamp usually stays attached to the helmet, but you can also
easily remove it by proceeding in the reverse order of the attachment
procedure (see 4.2.1 above)
easily remove it by proceeding in the reverse order of the attachment
procedure (see 4.2.1 above)
• To remove the headset from the clamp, press your finger firmly
against the arched tip of the back-plate (FIG. 5) and use the
other hand to slide the headset upwards along the reel (FIG. 5)
other hand to slide the headset upwards along the reel (FIG. 5)
4.2.3 Re-attaching the headset to the helmet.
• To re-attach the headset, simply slide it downwards along the
reel of the clamp (FIG. 4) until a light clicking sound indicates
that the headset has reached its proper operational position.
that the headset has reached its proper operational position.
FIG 5
Press here and
than slide the
headset unit up.
than slide the
headset unit up.