Cardo Systems ER01 Manuel D’Utilisation
scala-rider manual
DRAFT APRIL 25, 2005
Page 15 of 31
6.4 Terminating
Calls
To terminate a call, tap the CTRL button, followed by a tone
confirming the termination. If the other party terminates the call first,
you don't have to do anything.
Wait at least three seconds before pressing the CTRL button again to
start voice dialing.
confirming the termination. If the other party terminates the call first,
you don't have to do anything.
Wait at least three seconds before pressing the CTRL button again to
start voice dialing.
6.5 Volume
Control
The scala-rider headset comes equipped with AGC technology to
automatically adjust itself to the optimal speaker volume. Its
embedded sensors continuously measure the ambient noise and
driving speed to make manual adjustment of the volume buttons
unnecessary.
You can override the automatic volume adjustment anytime by
manual control of the volume buttons one step at a time (FIG. 8).
For each step of adjustment, you will hear a short beep.
automatically adjust itself to the optimal speaker volume. Its
embedded sensors continuously measure the ambient noise and
driving speed to make manual adjustment of the volume buttons
unnecessary.
You can override the automatic volume adjustment anytime by
manual control of the volume buttons one step at a time (FIG. 8).
For each step of adjustment, you will hear a short beep.
Press here to decrease
the volume
the volume
Press here to increase
the volume
the volume
FIG.8
Tap here to terminate
the call
the call
FIG. 7