SendFar Technology Co. Ltd. OAB-04004 Manuel D’Utilisation
Version 1.01
38
4.6 Utility
4.6.1 Software Upgrade
Step 1 Click Utility, select Software Upgrade page as the figure shown
below, and then use TFTP to upgrade AP. In the Utility – Software
Upgrade page, user must specify the TFTP server IP and select
by which file to upgrade (Program image, Web image), then click
OK button to start the TFTP upgrade process.
Upgrade page, user must specify the TFTP server IP and select
by which file to upgrade (Program image, Web image), then click
OK button to start the TFTP upgrade process.
Step 2 If the upgrade process is success, the AP will apply the new
settings and start rebooting right away.
Hint: You must set up a TFTP server and this server must contain one
latest new image.
latest new image.
Version 1.01
39
4.6.2 Administration
Step 1 Click Utility, Administration. The following figure shows the
Utility – Administration page.
9
Supervisor Account. Change the supervisor’s user name
& password in the Supervisor Account field, and Click
FINISH to take effect on the previous configuration
changes.
9
Apply the New Settings. Click Utility, Administration,
select the Save then Restart to apply the new
configuration settings.
configuration settings.
Step 2 Click FINISH to take effect on the previous configuration changes.
Hint: It takes about 10 seconds, to complete the restart process.