SendFar Technology Co. Ltd. OAB-04004 Manuel D’Utilisation

Page de 29
Version 1.01
2
1.  A Windows-based PC/AT compatible computer or Ethernet
data device with an available RJ-45 Ethernet port to run the
configuration program or with TCP/IP connection to the
Ethernet network.
2.  A 10/100Base-T Ethernet RJ-45 Ethernet cable is connected to
Ethernet network.
3.  A RS-232 consol port cable is connected to PC/AT compatible
computer.
4.  An AC power outlet (100~240V, 50~60Hz) supplies the power.
1.5  Inline Power Injector (PoE)
The SF-3000 is equipped with an Inline Power Injector module. The Inline
Power Injector (PoE) delivers both data and power to SF-3000 unit via a
signal Ethernet cable, and gives the following benefits to improve the
performance vs. installation cost ratio.
1.  This works great in areas where you may not have power
and/or Ethernet easily accessible, like house roof.
2.  This also allows you to place the SF-3000 unit closer to the
antenna, more easily thus reducing signal loss over antenna
cabling.
3.  Ethernet signal travels well over CAT 5 cable but 2.4GHz
signal doesn't do as well over antenna cabling.
4.  Ethernet cabling is much cheaper than Antenna cabling.
Version 1.01
3
Chapter 2. Installation and Basic Configuration
This chapter describes the procedures of installing the SF-3000.
2.1  Before You Start
After unpacking the system, make sure the following items are present and
in good condition.
1.  SF-3000 Outdoor Wireless Client Bridge unit
2.  AC/DC adapter 100~240VAC, 50~60Hz with wall-mount plug
and DC plug power cord
3.  Inline Power Injector (PoE) 24VDC, 830mA
4.  RJ-45 CAT-5 Ethernet cable 30m
5.  RS-232 null modem console cable 1.8m
6.  Grounding wire 1.8m
7.  User manual CD-disc
8.  Wall/mast mounting kit, including one (1) band clamp
   
     
     
        
      
   
2
3
4
5
7
8
6
1