SendFar Technology Co. Ltd. ORB-02001 Manuel D’Utilisation
30
5. To add another entry to the Fixed Host Mapping Pool, repeat step 1
through step 3.
6. When you have included all the entries you need, click FINISH .
Figure 4-6 Add Fixed Host Entry
31
4.5 Configure
SNMP
Click General Config, SNMP, and then the General Configuration – SNMP
Community Parameter screen appears. Figure 4-7 shows the current
SNMP community pool and trap host pool.
Community Parameter screen appears. Figure 4-7 shows the current
SNMP community pool and trap host pool.
Figure 4-7 General Configuration – SNMP Community Parameter
4.5.1 Configure Community Pool
The SNMP Community Pool has five entries.
1.
To modify a entry, click the select button beside the entry index
number and then click Modify , the configuration page Figure 4-8
appears.
number and then click Modify , the configuration page Figure 4-8
appears.
2.
Specify the Validity, Access Right and Community field.
- Validity.
Select Enable or Disable to control this community.