Manualsbrain.com
  1. Manuels
  2. Marques
  3. SendFar Technology Co. Ltd.
  4. ORB-02001
  5. Manuel D’Utilisation

SendFar Technology Co. Ltd. ORB-02001 Manuel D’Utilisation

Télécharger
Page de 29
10 
2.2  Remote Wireless Router-to-Central Wireless 
Bridge 
 
1.  Set the Central RB as a bridge (bridge IP address is 192.168.2.1). 
2.  Set Wireless parameters on Central RB: Channel (1) and SSID 
(wireless). 
3.  Set the Remote RB as a Router (Wireless Interface IP is 192.168.2.2, 
Ethernet Interface IP is 192.168.10.1, must turn on NAT on Wireless 
Interface, default route is 192.168.2.254). 
4.  Set Wireless parameters on Remote RB: Channel (1) and SSID 
(wireless), these parameters must same with Central RB. 
5.  Set the DHCP server service on the Remote RB and apply it on 
Ethernet Interface. 
6.  The Remote RB assign IP address to PC1 and PC2 
 
 
 
11 
2.3  Remote Wireless Bridge-to-Central Wireless 
Router 
 
1.  Set the Central RB run as a Wireless Router (Wireless Interface IP is 
192.168.1.1, Ethernet Interface IP is 192.168.2.1, must turn on NAT on 
Ethernet interface, default route is 192.168.2.254). 
2.  Set Wireless parameters on Central RB: Channel (1) and SSID 
(wireless) 
3.  Set the DHCP server service on the Central RB and apply it on 
Wireless Interface. 
4.  Set the Remote RB as a Bridge (Bridge Interface IP is 192.168.1.2).  
5.  Set Wireless parameters on Remote RB: Channel (1) and SSID 
(wireless), these parameters must same with Central RB. 
6.  The Central RB assign IP address to PC1 and PC2 
7.  The operator can also turn off NAT behavior on Central RB and 
two subnets are transparent.