SendFar Technology Co. Ltd. ORB-04002 Manuel D’Utilisation
26
In this page, enter the Wireless interface IP (default is 192.168.1.1) and
Wireless interface Net Mask (default is 255.255.255.0) that are suitable for
your wireless network, and specify the Ethernet IP address (default is
192.168.2.1) and Ethernet Net Mask (default is 255.255.255.0) of the
Ethernet interface. And then, if you are an ADSL subscriber, you may
specify that your personal ISP provided PPPoE Username and PPPoE
Password to enable ADSL broadband access.
Sometimes users have to conFigure 2-correct network settings in Gateway
and DNS tab of your wireless client computers to surf the Internet, or you
can enable DHCP server services for all wireless clients (default DHCP
server setting of the RB is disable in wireless network). In general DHCP
server parameters segment, input Assign Default Gateway (default is
192.168.2.254), Assign Net Mask (default is 255.255.255.0), Assign Name
Server (default is 192.168.1.1), DHCP Start IP (default is 192.168.1.240),
DHCP End IP (default is 192.168.1.250) and choice Apply Interface on
HWLAN to made your DHCP server services available for wireless network,
at finally click NEXT at the bottom of this page to complete the modification
of this page.
Step 4: Configure IEEE 802.11b WLAN parameters (as shown in Figure 2-
9)
In this page, enter the Channel (default is 1), rts Threshold (default is 250),
frag Threshold (default is 1600), SSID (default is rb8100) and Station
Name (default is ap) that are suitable for your radio network and then you
can clicked radio button to disable WEP or enable 64/128 bit WEP services
(default is disable), if WEP is enabled, you must input corresponded Default
Key index and WEP Key. After that, click NEXT at the bottom of this page to
complete the modification of this page.
Step 5: Preview the configured setting of this RB (as shown in Figure 2-10)
This page will present the current settings of the RB to the system
administrator, the operator can easy to view all running configuration in here.
After that, click Save button to store the changes to the RB.
Step 6: Restart this RB (as shown in Figure 2-11)
In this page, you can click the RESTART button at the bottom of this page to
take effect the previous configuration changes.
Wireless interface Net Mask (default is 255.255.255.0) that are suitable for
your wireless network, and specify the Ethernet IP address (default is
192.168.2.1) and Ethernet Net Mask (default is 255.255.255.0) of the
Ethernet interface. And then, if you are an ADSL subscriber, you may
specify that your personal ISP provided PPPoE Username and PPPoE
Password to enable ADSL broadband access.
Sometimes users have to conFigure 2-correct network settings in Gateway
and DNS tab of your wireless client computers to surf the Internet, or you
can enable DHCP server services for all wireless clients (default DHCP
server setting of the RB is disable in wireless network). In general DHCP
server parameters segment, input Assign Default Gateway (default is
192.168.2.254), Assign Net Mask (default is 255.255.255.0), Assign Name
Server (default is 192.168.1.1), DHCP Start IP (default is 192.168.1.240),
DHCP End IP (default is 192.168.1.250) and choice Apply Interface on
HWLAN to made your DHCP server services available for wireless network,
at finally click NEXT at the bottom of this page to complete the modification
of this page.
Step 4: Configure IEEE 802.11b WLAN parameters (as shown in Figure 2-
9)
In this page, enter the Channel (default is 1), rts Threshold (default is 250),
frag Threshold (default is 1600), SSID (default is rb8100) and Station
Name (default is ap) that are suitable for your radio network and then you
can clicked radio button to disable WEP or enable 64/128 bit WEP services
(default is disable), if WEP is enabled, you must input corresponded Default
Key index and WEP Key. After that, click NEXT at the bottom of this page to
complete the modification of this page.
Step 5: Preview the configured setting of this RB (as shown in Figure 2-10)
This page will present the current settings of the RB to the system
administrator, the operator can easy to view all running configuration in here.
After that, click Save button to store the changes to the RB.
Step 6: Restart this RB (as shown in Figure 2-11)
In this page, you can click the RESTART button at the bottom of this page to
take effect the previous configuration changes.
27
2.2.5 Configure the RB as a Central RB with dynamic IP
address Ethernet
address Ethernet
Step 1: Configure the operation role of this RB (as shown in Figure 2-6)
Click Quick Config, select Central Wireless Router/Bridge to setup this RB
that play with the Central RB role and then click NEXT at the bottom of this
page to complete the modification of this page.
Step 2: Configure the operation mode of this RB (as shown in Figure 2-7)
Click Quick Config, select Central Wireless Router to setup this RB
operated in routing mode, you also need to select the Ethernet connection
type in Dynamic IP address (DHCP Client), and then click NEXT at the
bottom of this page to complete the modification of this page.
Step 3: Configure TCP/IP parameters (as shown in Figure 2-13)
In this page, enter the Wireless interface IP (default is 192.168.1.1) and
Wireless interface Net Mask (default is 255.255.255.0) that are suitable for
your wireless network.
Click Quick Config, select Central Wireless Router/Bridge to setup this RB
that play with the Central RB role and then click NEXT at the bottom of this
page to complete the modification of this page.
Step 2: Configure the operation mode of this RB (as shown in Figure 2-7)
Click Quick Config, select Central Wireless Router to setup this RB
operated in routing mode, you also need to select the Ethernet connection
type in Dynamic IP address (DHCP Client), and then click NEXT at the
bottom of this page to complete the modification of this page.
Step 3: Configure TCP/IP parameters (as shown in Figure 2-13)
In this page, enter the Wireless interface IP (default is 192.168.1.1) and
Wireless interface Net Mask (default is 255.255.255.0) that are suitable for
your wireless network.
Figure 2-13