SendFar Technology Co. Ltd. ORB-04002 Manuel D’Utilisation
34
2.
Connect the Ethernet cable for connecting the RB to the network
3.
Connect a computer to the same network with this RB
4.
Start your Microsoft Internet Explorer web browser program from a
LAN-attached computer. To access the web interface of the RB, you
have to disable Access the Internet using a proxy server function in
Windows 2000 [Control Panel / Internet Options / Connections/LAN
Settings] as shown in Figure 3-2.
LAN-attached computer. To access the web interface of the RB, you
have to disable Access the Internet using a proxy server function in
Windows 2000 [Control Panel / Internet Options / Connections/LAN
Settings] as shown in Figure 3-2.
Figure 3-2
7. Type the IP address and HTTP port of the RB (default port is 2000, IP
is 192.168.2.1) in the address field (http://192.168.2.1:2000/) and press
Enter. Make sure that the IP addresses of RB and your computer are in
the same subnet.
Enter. Make sure that the IP addresses of RB and your computer are in
the same subnet.
8. After the connection is established, you will see the User Identification
Window as shown in Figure3-3 Enter the proper User Name and
Password to see the web user interface of the RB. The default user
name and password is root and root, respectively
Password to see the web user interface of the RB. The default user
name and password is root and root, respectively
35
Figure 3-3
3.2
Configure the RB
The RB can be configured into two operation roles:
Central Wireless Router/Bridge(Central RB) and Remote Wireless
Router/Bridge(Remote RB), the Central RB can performed in four operation
modes and the Remote RB can performed in two operation modes
Central RB:
1. Central Wireless Bridge
1. Central Wireless Bridge
2. Central Wireless Router with PPPoE Ethernet connection
3. Central Wireless Router with dynamic IP address Ethernet
4. Central Wireless Router with static IP address Ethernet
Remote RB:
1. Remote Wireless Bridge
1. Remote Wireless Bridge
2. Remote Wireless Router
The RB is shipped with default configuration is as a bridge between an
Ethernet and wireless network. Users simply need to attach the RB to your
wired LAN. If users would like to configure the RB, please refer to the
Ethernet and wireless network. Users simply need to attach the RB to your
wired LAN. If users would like to configure the RB, please refer to the