SendFar Technology Co. Ltd. ORB-04002 Manuel D’Utilisation
50
Figure 3-15
6. Preview the configured setting of this RB (as shown in Figure 3-16)
This page will present the current settings of the RB to system
administrator, the operator can easy to view all running configuration in
here. After that, click Save button to store the changes to the RB.
administrator, the operator can easy to view all running configuration in
here. After that, click Save button to store the changes to the RB.
7. Enable NAT
Sometimes, the operator may implement NAT on the network. In here,
you can click Basic Config, select Interface (as shown in Figure 3-9),
in this page, you can click radio button and enter MODIFY to choice
which interface that you want to change it (as shown in Figure 3-10).
you can click Basic Config, select Interface (as shown in Figure 3-9),
in this page, you can click radio button and enter MODIFY to choice
which interface that you want to change it (as shown in Figure 3-10).
In order to enable NAT service, choice the NAT(PAT) in the interface
Wireless and Ethernet. For example, make sure Ethernet interface within
NAT(PAT) Off and Wireless interface is NAT(PAT) On, it means that
every communication through the Wireless interface needs to do NAT
transfer.
Wireless and Ethernet. For example, make sure Ethernet interface within
NAT(PAT) Off and Wireless interface is NAT(PAT) On, it means that
every communication through the Wireless interface needs to do NAT
transfer.
51
Figure 3-16