SendFar Technology Co. Ltd. ORB-04002 Manuel D’Utilisation
62
Figure 3-22
63
3.6.2 Configure Bridge
1. Click Advence Config and select the Bridging, and then click Enable
for Bridge Function as shown in Figure 3-5. In the Bridging Parameter
window, enter the IP Address (default is 192.168.2.1) and Subnet Mask
(default is 255.255.255.0) that are suitable for your network domain.
window, enter the IP Address (default is 192.168.2.1) and Subnet Mask
(default is 255.255.255.0) that are suitable for your network domain.
2. You can specify the MAC address of a Wireless/Ethernet client. All MAC
entries in the MAC address table are Permitted/Blocked/Learning to
connect to the RB. In here, you can also click ADD, DELETE, MODIFY
button to maintain this MAC address table.
connect to the RB. In here, you can also click ADD, DELETE, MODIFY
button to maintain this MAC address table.
3. After that, click FINISH at the bottom of this page to complete the
modification of this page.