Manualsbrain.com
  1. Manuels
  2. Marques
  3. SendFar Technology Co. Ltd.
  4. ORB-04002
  5. Manuel D’Utilisation

SendFar Technology Co. Ltd. ORB-04002 Manuel D’Utilisation

Télécharger
Page de 51
 
 
86
 
Chapter 6.  Default Settings 
6.1 
Basic Configuration 
6.1.1  System 
Parameter 
Description 
Default Value 
 Supervisor ID 
 Supervisor’s identity code 
root 
 Supervisor Password 
 Supervisor’s password 
root 
 Password Confirm 
 Confirm the password again 
root 
 Host Name 
 Host name for the AP 
HWLAN 
 Domain Name 
 Domain name for the AP 
domain.com 
 Default Route IP 
 Address 
 IP address of the gateway for  
 default route when TCP/IP   
 filtering 
192.168.2.254 
DNS Server Parameter 
DNS Server 1 Address 
DNS Server 2 Address 
DNS Server 3 Address 
IP addresses of the DNS Servers 
of your Local ISP 
192.168.2.254 
 
 
 
6.1.2  Interface  
Parameter 
Description 
Default Value 
Interface No. 
No.1 Wireless Interface 
No.2 Ethernet Interface 
No.3 PPPoE Interface 
No.4 PPP Interface 
Note: 
1. No.3 is effective  
only when No.2 is  
  Active. 
2. Default No.3 & 
No. 4 is Disable
 
 
 
87
 
Status 
Enable or disable the 
Corresponding interface 
Active 
IP address 
IP address of the corresponding 
interface. The user can use a 
 LAN attached (wired or wireless) 
 computer to configure the AP  
 through using a web browser  
 or telnet program on a LAN 
 attached computer. 
No.1: 192.168.1.1 
No.2: 192.168.2.1 
No.3: 192.168.3.1 
No.4: 192.168.4.1 
 Net Mask 
 Consists of four sets of digits  
 that help divide a network into  
 sub-networks and simplify 
 routing and data transmission 
No.1:255.255.255.0 
No.2:255.255.255.0 
No.3:255.255.255.0 
No.4:255.255.255.0 
 NAT(PAT) 
 Select the network type for NAT 
 function. 
 OFF <-> ON: NAT enable 
 ON <-> ON: NAT disable 
 OFF <-> OFF: NAT disable 
No.1: OFF 
No.2: OFF 
No.3: ON 
No.4: OFF 
 Bridging 
 Shows the corresponding  
 interface that joins to form a 
 bridge  
No.1: Not Join 
No.2: Not Join 
No.3: Not Join 
No.4: Not Join 
 ISP Index 
 Select the ISP index given in  
 the ISP pool 
ISP1 
 IPCP 
 Select IP Control Protocol 
 (Static or dynamic) for 
 PPP/PPPoE interface 
Dynamic 
 Idle Time Out (min) 
 Cancel the dial if not connected 
 within this period 
3min 
 Dial Priority 
 Set the dial-up priority of the  
 corresponding interface 
PPPoE: 3 
PPP: 2 
Dial-in 
 Enable or disable the dial-in  
 function of the corresponding  
 interface 
Disable