SendFar Technology Co. Ltd. WPC-03003 Manuel D’Utilisation

Page de 11
 
Version 1.00 
3
 
Infrastructure Mode 
The infrastructure mode requires the use of an access point (AP). In this 
mode, all wireless communications between two computers have to be via 
the AP no matter the AP is wired to Ethernet network or stand-alone.  
If wired to an Ethernet network as shown in Figure 1-4, the AP serves as a 
bridge and provides the link between the server and the wireless clients. 
The wireless clients can move freely throughout the coverage area of the 
AP while remaining connected to the server. Since the AP is connected to 
the wired network, each client would have access to server resources as 
well as to other clients. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 1-4 Infrastructure mode 
 
 
Version 1.00 
4
 
Chapter 2   Installing Driver & Client Utility 
This chapter describes how to install the PC Card drivers and client utility 
under Windows 98SE/ME/2000/XP. 
2.1  Installation for Windows XP 
During the installation, Windows XP may need to copy Windows systems 
files from the Windows XP installation diskette or CD-ROM. Therefore you 
will need a copy of the Windows XP installation diskette or CD-ROM at 
hand before installing the driver.  
 
Installation Procedure: 
 
1.  Turn on your computer. 
2. Insert 
the 
Wireless LAN Driver CD into your CD-ROM drive.  
3.  Double click the “IPN2120 Wlan Driver and Utility.exe” located in 
“\WLAN Utility with AP\” as shown in Figure 2-1
 
 
Figure 2-1 
 
4.  The program will automatically proceed with installing, press Next to 
continue as shown in Figure 2-2