SendFar Technology Co. Ltd. WPC-03003 Manuel D’Utilisation
Version 1.00
17
Verify that the Network Mode of the PC Card is
configured correctly.
configured correctly.
Nonfunctioning card LED The PC Card is not powered on. The cause may
be:
--No Driver loaded or installed.
--Card – Driver mismatch which prevented the
driver from loading.
--Device conflict which prevented the driver from
loading.
Actions:
--Verify that a driver has been installed.
--Determine if there is a conflict with another
device.
--No Driver loaded or installed.
--Card – Driver mismatch which prevented the
driver from loading.
--Device conflict which prevented the driver from
loading.
Actions:
--Verify that a driver has been installed.
--Determine if there is a conflict with another
device.
Weak signal or
intermittent connection
intermittent connection
Try reorienting the antenna. The PC Card
antenna is attached to the end of the PC Card.
For best use of the antenna:
Keep the area around the antenna clear from
materials that could block radio transmission,
such as metal objects, electronic devices, and
cordless telephones.
If your signal is weak, change the direction of the
antenna slightly.
If necessary, move your notebook computer a
few inches to find a better signal.
Use the Link Quality and Signal Strength display
in the Client Utility to determine the best
location and orientation for a network connection.
antenna is attached to the end of the PC Card.
For best use of the antenna:
Keep the area around the antenna clear from
materials that could block radio transmission,
such as metal objects, electronic devices, and
cordless telephones.
If your signal is weak, change the direction of the
antenna slightly.
If necessary, move your notebook computer a
few inches to find a better signal.
Use the Link Quality and Signal Strength display
in the Client Utility to determine the best
location and orientation for a network connection.
Version 1.00
18
Chapter 4 Product Specifications
General
Radio Data Rate 11, 5.5, 2 and 1 Mbps, Auto Fallback
Operating Voltage 3.3V/5V
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
Compatibility Fully interoperable with IEEE802.11b compliant products
LED Indicator RF Link activity
Operating Voltage 3.3V/5V
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
Compatibility Fully interoperable with IEEE802.11b compliant products
LED Indicator RF Link activity
Network Information
Network Architecture Support ad-hoc, peer-to-peer networks and
infrastructure communications to wired Ethernet networks via Access Point
Drivers Windows 98SE/ME/2000/XP
Access Protocol CSMA/CA
Roaming IEEE802.11b compliant
Security 64/128-bit WEP data encryption
infrastructure communications to wired Ethernet networks via Access Point
Drivers Windows 98SE/ME/2000/XP
Access Protocol CSMA/CA
Roaming IEEE802.11b compliant
Security 64/128-bit WEP data encryption
Radio
Frequency Band 2.4 – 2.4835 GHz
Radio Type Direct Sequence Spread Spectrum (DSSS)
Modulation CCK (11, 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps)
Operation Channels 11 for North America & Taiwan, 14 for Japan, 13 for
Europe, 2 for Spain, 4 for France
RF Output Power 20dBm (WPC-3110)
Sensitivity @ THP≧3Mbps 11 Mbps <-83dBm (WPC-3110),
Radio Type Direct Sequence Spread Spectrum (DSSS)
Modulation CCK (11, 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps)
Operation Channels 11 for North America & Taiwan, 14 for Japan, 13 for
Europe, 2 for Spain, 4 for France
RF Output Power 20dBm (WPC-3110)
Sensitivity @ THP≧3Mbps 11 Mbps <-83dBm (WPC-3110),
Environmental
Temperature Range 0 to 55℃ (operating), -20 to 75℃ (storage)
Humidity (non-condensing) 10% to 95% typical
Humidity (non-condensing) 10% to 95% typical
Physical Specifications
Form Factor PCMCIA Type II PC Card
Dimensions 118 (L)mm * 54(W)mm * 9 / 4.8 (H)mm
Weight 45 g
Dimensions 118 (L)mm * 54(W)mm * 9 / 4.8 (H)mm
Weight 45 g