Redline Communications Inc. AN80IC Manuel D’Utilisation
Red
CONNEX
™
User
AN-80i
Manual
70-00072-01-05-DRAFT
Proprietary Redline Communications © 2008
Page 67 of 94
January 22, 2008
5.3.8 New
Use the new command to create a new link, group, or connector ID.
Table 22: CLI - new
PTP PMP Parameter/Description
√
new
<id_type>
- [link | group | conn]
<id>
- <id number>
5.3.9 Ping
Use the ping command to initiate an ICMP ping command from the AN-80i.
Table 23: CLI - new
PTP PMP Parameter/Description
√
ping
<address>
- Target IP address
<count>
- Number of ICMP packets to send [1..16].
5.3.10 Reset
Use the reset command to set all AN-80i statistics values to zero.
Table 24: CLI - reset
PTP PMP Parameter/Description
√
√
stats: Reset the AN-80i statistics counters.
reset
reset
stats
<Enter>
5.3.11 Save
Use the save command to copy edited parameter settings into non-volatile memory.
save [option] <Enter>
Table 25: CLI - save
PTP PMP Parameter/Description
√
√
config
: Save Ethernet, wireless, and user configuration settings.
snmp
: Save SNMP settings.
defaultconfig
: Overwrite parameters with the factory default settings. The
following settings are not affected: system name, location, details and contact,
frequency list, SNMP configuration, IDs table (PMP only).
frequency list, SNMP configuration, IDs table (PMP only).
5.3.12 Script
Use the script command to save a file containing a string of CLI commands that can be
used to restore the current (active) configuration of the AN-80i.
used to restore the current (active) configuration of the AN-80i.
Table 26: CLI - script
PTP PMP Parameter/Description
√
script
<server>
- [server IP address]
<name>
- [script file name]